In the world of waterproof switches, designers understand pendant switches to be pushbutton switches that are hand actuated by an actual human. There are typically leads extending from the body of the switch which can allow an ergonomic distance between the operator and the control system. These switches, or sometimes “pendant stations” full of pushbutton switches are designed to control various systems in the factory or on machinery. A common commercially available configuration is shown below:
typical commodity pendant switch, consumer grade
This configuration is common, with the button at the end of a cylindrical enclosure, meant to be used for things like nursing call stations, On/Off operator control, or momentary device control where the device is actuated only as long as the operator keeps the pendant depressed. The vast majority of pendant switches you will fine are really of a commercial variety and their target use is for sedate, indoor applications.
But for construction vehicles, military equipment, or heavy machinery control, the vast majority of pendant devices you will find lack the robustness and environmental sealing necessary to operate effectively in these deployments.
CPI Pendant Switch Solutions
Control products makes a complete line of waterproof pendant switches which are specifically designed for the needs of high reliability, high endurance, and complete watertight operation. Couple these with our versatile mounting brackets and what you have is a pendant switch with up to 15A capability that will be ready to work when you need it, no matter what it is exposed to in the interim.
K1005 Pendant Switch – This is a maintained contact rocker switch version. This pendant switch has seen many military and non military applications owing to its high tolerance to heat and its extreme electromechanical endurance. Not to mention that it is truly waterproof (ie.. submersible)
B7151 Pendant Switch – this is our “high button” momentary
closure pendant, also completely sealed in Neoprene and immune to moisture and vibration. Common uses include as a welding torch switch or for motor “jogging” applications.
CPI Pendant Switch Applications
Our pendants get chosen for any application where there is a potentially wet or outdoor environment and designers don’t want to take chances on the reliability of the switch. Here’s a few examples.
THAAD Missle Launch Truck – Build by Oshkosh and Lockeed
In this application our K1005-504 is mounted near the wheel well where it can be subject to a fair amount of heat and vibration between uses. Our Neoprene seal extends the temperature range from -65F to 185F and completely seals the switch away from dust, moisture and vibration as well.
US Marines Humvee – Built by SAIC.
In this application the same K1005-504 is used as a control on the Up-Front-Display Unit inside the vehicle.
Industrial Sand Blaster – Clemo Industries
In this heavy duty sand blasting 
machine exposed to extremes of water, dirt, dust and other airborne particulates. A Robustly sealed and washdown proof switch is of extreme importance to these folks.
CPI Pendants are Unique Problem Solvers – Call Us Today!
When the run-of-the-mill commercial pendant switches just won’t get the job done, our unique capabilities in switch design might be just what you need. We’ve been making high endurance electromechanical switches for the toughest applications on planet earth for over 70 years.
Is your application tough enough for our switches? Let’s find out..
This content was originally posted at https://www.cpi-nj.com/blog/sealed-pendant-switches-the-jewels-of-waterproof-switches/
refining and selling for over 70 years. They are implemented in a style commonly referred to as “pendant switches” owing to their size and form factor. What CPI does is to pair one of our sealed, waterproof pendant switch designs, with an actuator mounting bracket which can allow the switch to be used in an almost infinite number of applications. Some customer even use the switch without any bracket for a manual operator driven application such as a toggle switch on a motorboat winch.
on industrial sand blasters, and in one case as a customization to a Mountain bike used for enduro-racing (See our post on 
Control Products, INC 